On the CLI at ROOT
/usr/bin/shutdown -y -g0 -i0
/usr/bin/shutdown -y -g0 -i6
Power Up CMS
Push the button and wait. Once the CMS is up from the CLI
You will see a number of messages PUMP-UP but you are waiting for the DATAX with the number of calls beside it which means you are seeing data from the switch.
**Notes added by Giel**
It worth noting that these commands are used on Avaya CMS running on the Solaris operating system.
/usr/bin/shutdown -y -g0 -i0 will take you to the OK boot prompt, which means it will shut the software but still allow you to run diagnostics on the hardware. This run level can also be reached by pressing the STOP + A keys on the Sun Keyboard.
Init 0= OK boot prompt (i0)
Init 3 = Normal running level (i3)
Init 5 =Shutdown and power off (i5)
Init 6=Reboot (i6)
The “g0” refers to the grace period before shutdown